ORDER ONLINE OR CALL TOLL FREE: 1-844-859-3838 info@iGuardFire.com

iGuardStove Wireless Setup

Use the following instructions to connect your iGuardStove to your wireless network.

To set the Wireless Network press and hold the Menu button on the control panel for 2 seconds to enter the Menu section.



Scroll to Wireless Setup using the ⬆ ⬇ arrows and choose Select.


If your router has the “Connect Using WPS” feature this choose this.    It’s a quick connect method for newer routers that have the WPS feature.  This eliminates the need to enter lengthy passwords and other information.

Select the WPS option on the iGuardStove and then you have up to 4 minutes to press the WPS button on the router and the 2 devices will automatically connect and introduce themselves.

If your router does not have the “WPS” feature then connect using this manual method.

Choose Scan for Networks











Choose your Network and then Select.





Then enter your password using the ⬆ ⬇  arrows to Select and then move to next digit using the lower arrows.

After a Successful Connection use Back to get to Main screen.

Signal Strength

To check the Wi-Fi signal strength while under Wireless Setup choose Details which is the middle button.

This will show your signal strength that the iGuardStove is receiving from your Wi-Fi router. Make sure it is over 50% or you might have connection problems. You might have to relocate your wireless router or add a booster.